Fefco
Published on Fefco (https://www.fefco.org)

Home > FEFCO Workshop on Acceptance Procedure for Converting Equipment

FEFCO Workshop on Acceptance Procedure for Converting Equipment

Workshop Questionnaire
Dear Workshop Participant, Thank you for participating at FEFCO Workshop on Acceptance Procedure for Converting Equipment. Please take a few minutes to fill in this survey which will help us to serve you better in the future. Best regards, Nathalie Schneegans Communications Director
1|Above expectations 2|As expected 3|Below expectations
1|Yes 2|No
a1|Excellent a2|Good a3|Satisfactory a4|Unsatisfactory
a1|Excellent a2|Good a3|Satisfactory a4|Unsatisfactory
a1|Excellent a2|Good a3|Satisfactory a4|Unsatisfactory
a1|Excellent a2|Good a3|Satisfactory a4|Unsatisfactory
ExcellentGoodSatisfactoryUnsatisfactory
Welcome Address - Angelika Christ - FEFCO Secretary Gener
Introduction "Equipment Testing and Standards"- Wilbert Streefland, Technology Coaching
A Practical Experience - Richard Coward - Rigid Containers UK
Testing Printing Equipment - Jan Lindstrom - MarquipWardUnited
Characterization of Die Cutter for OEM acceptance test - Anello Meloro and Dominique Ravot - Bobst Group
Folding Equipment Testing method - Ulrich Wolz & Ralf Schifmann - BGM Bahmüller & Göpfert
Practical Experience: Colour to Colour Register- Klaus Lüke - Klingele Wellpappe
Machine Acceptance impact on Your business & Acceptance Tests Results Map- Wilbert Streefland, Technology Coaching
Closure - Chairman Producution Committee
1|Very likely 2|Likely 3|Unlikely 4|Certainly not
Thank you for completing this survey